{"title":"Hexa Gear","description":"","products":[{"product_id":"kotobukiya-hg038-hexa-gear-alternative-sneak-sight","title":"Kotobukiya HG038 Hexa Gear: Alternative Sneak Sight","description":"\u003cp\u003e1\/24 Hexa Gear: Alternative Sneak Sight\u003c\/p\u003e\n\u003cp\u003eThe SNEAK SIGHT is a reconnaissance HEXA GEAR developed by Earthcline Biomechanics and produced by a third-party arsenal.\u003c\/p\u003e\n\u003cp\u003eThe development concept was a drone that specializes in scouting, communication, and stealth. This led to the adoption of an ornithopter system where a combination of flapping wings and gliding are used for flight in order to reduce sound. The unit's body is also made of altered artificial HEXA G-R.A.M muscles, found in third-generation HEXA GEAR, giving it uncharacteristic flexibility for a mechanical unit. Additionally, the feathers feature an exceedingly sharp design that when combined with the kinetic energy from high-speed flight and diving, can cut through foes like a hot knife through butter.\u003c\/p\u003e\n\u003cp\u003eHowever, its armor is thinner than the EX ARMOR TYPE, which is already relatively light as it prioritizes weight reduction, and even small arms fire from a Governor can be lethal. In order to combat this, its top speed, while outmatched by the Windfall, surpasses that of ordinary drones. It can maneuver nimbly in the air like falling leaves in the wind, making it an incredibly difficult target to hit from the ground.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe most distinctive feature of the unit, however, was the idea to not equip the KARMA module.\u003c\/p\u003e\n\u003cp\u003eThe unit is remotely controlled by a KARMA mounted on a HEXA GEAR mothership via a network established by SNEAK SIGHT itself. By using a data link system that can relay with multiple units, SNEAK SIGHT can perform three-dimensional scans and patrols in large areas, and covertly penetrate deep within hostile territory, which would otherwise be unthinkable. In addition, as it can also be used as an armored flight unit for a short period of time, the Governor in the mothership can have a bird's-eye view of the battlefield and use the gathered information to quickly reposition units like pieces on a chessboard. While this remote control feature is possible for any generation of KARMA-equipped HEXA GEAR, the number of units that can be simultaneously operated increases in proportion to the storage capacity of the KARMA, notably the older generations that do not require a Zoatex on the mothership.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel Specifications: \u003cbr\u003e\u003c\/strong\u003e■ The first in line for an all new model kit line which aims to create models that are both compact in size and easy to assemble called “Alternative” is now here. Similar to that of the Governor series, this model is made to be easy to assemble, even for model kit beginners.\u003cbr\u003e■ The model is equipped with 5mm and 3mm HEXA GEAR standard joints, making it easy to change out parts and customize with other series’ kits such as Frame Arms Girl, Megami Device, Modeling Support Goods, and more. \u003cbr\u003e■ The two attachment points on the head allow it to be exchanged and used as a Governor’s head.\u003cbr\u003e*Parts may not fit perfectly onto some Governor models and will need modifications.\u003cbr\u003e■ The model can be used as a simple flight unit for Governors using the HEXA G-R.A.M on its chest.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Parts: \u003cbr\u003e\u003c\/strong\u003e■ SNEAK SIGHT Model ×1\u003cbr\u003e■ Short HEXA G-R.A.M ×1\u003cbr\u003e■ Long HEXA G-R.A.M ×1\u003cbr\u003e■ Weapon Attachable Leg ×2 \u003cbr\u003e■ Landing Leg ×2\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41774565687478,"sku":"KOTHG038","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/51eLJON5sUL.__AC_SY300_SX300_QL70_FMwebp.webp?v=1704296643"},{"product_id":"kotobukiya-hg064-hexa-gear-weird-tails","title":"Kotobukiya HG064 Hexa Gear: Weird Tails","description":"\u003cp\u003eHexa Gear: Weird Tails\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCombat preparation complete. Start your engines.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e■ There are three “Speared Rowers” that can be removed and deployed or equipped on the back of the model. Use accessories such as the separately sold Playing Base or Flying Base in order to simulate the models as it is being remotely operated.\u003cbr\u003e■ The Speared Rowers’ base and blade can be adjusted to display the weapon in “Plasma Veil Deploy Mode” and “Independent Attack Form.”\u003cbr\u003e■ A high-detailed cockpit included in this model can be opened and closed, allowing a separately sold Governor unit to be placed inside. The monitor part can be moved, and the control stick can be slid left and right or rotated to make it easier for the Governor to board the unit.\u003cbr\u003e■ The step unit where the Governor’s feet can be placed is movable, allowing the Governor to be seated in various positions.\u003cbr\u003e■ The HEXA G-R.A.M storage units can be removed from the model’s back and displayed in a Governor’s hand.\u003cbr\u003e■ The model can be converted between the combat-based “Zoatex Mode” or the cruising-based “Air Bike Mode.”\u003cbr\u003e■ Parts of the armor can be disassembled and used in a wide range of applications such as attaching to other Hexa Gear models.\u003cbr\u003e■ Can be attached to various Flying Base (sold separately) to enjoy countless action poses.\u003c\/p\u003e\n\u003cp\u003eIncluded Items:\u003cbr\u003e■ Weird Tails Model x1\u003cbr\u003e■ Air Bike Mode Attachment Parts x1\u003cbr\u003e■ Archive Card x1\u003c\/p\u003e\n\u003cp\u003e(This item is a reproduction.)\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41774565720246,"sku":"KTHG064","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/s-l1600_b6b8d4c1-7c14-4302-a2fc-26993d8d9709.jpg?v=1704245428"},{"product_id":"kotobukiya-hg073-hexa-gear-voltrex-wrath","title":"Kotobukiya HG073 Hexa Gear: Voltrex Wrath","description":"\u003cp\u003eHexa Gear: Voltrex Wrath Plastic Model Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel Specifications:\u003c\/strong\u003e\u003cbr\u003e・The hip joint unit is newly redesigned to accommodate more dynamic posing.\u003cbr\u003e・Each claw of the Plasma Talons can be posed individually, allowing for a variety of expressive poses.\u003cbr\u003e・Use the included attachment to equip the separately sold WEAPON UNIT 30 Belt Links to the Gatling Gun and\u003cbr\u003eincrease the amount of ammunition.\u003cbr\u003e・The base of the Tail Blade is reconfigured for easier use, including the ability to move the blades left and right or lock them when stowed.\u003cbr\u003e・The cockpit includes new steering and step units, making it easier for a Governor model to ride in it. The step unit is articulated to accommodate Governor models.\u003cbr\u003e・The Plasma Cannon can be attached to Voltrex Wrath or removed and used with separately sold Governor models.\u003cbr\u003e・The Predator Bite on the head can be opened and closed. The included extension mount part can also be attached to\u003cbr\u003eboth cheeks.\u003cbr\u003e・By using the upper leg extension joint parts, users can create a variety of customizations with this model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Items:\u003c\/strong\u003e\u003cbr\u003e・Voltrex Wrath Model x1\u003cbr\u003e・Upper Leg Extension Joint Parts x2\u003cbr\u003e・Gatling Gun Extension Attachment x1\u003cbr\u003e・Extension Mount Part x1\u003cbr\u003e・Archive Card x1\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41774565753014,"sku":"KOTHG073","price":67.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/BANHG073.jpg?v=1704245385"},{"product_id":"kotobukiya-hg075-hexa-gear-alternative-track-down","title":"Kotobukiya HG075 Hexa Gear Alternative Track Down 1\/24 Scale Model Kit","description":"\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cp\u003eThe Hexa Gear Alternative model line by Kotobukiya aims to create models that are compact in size and easy to assemble. The Track Down model will stand about 3 inches tall once complete and will contain a high level of articulation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3.15 inches (8cm)\u003c\/li\u003e\n\u003cli\u003eMade of plastic\u003c\/li\u003e\n\u003cli\u003eCompact and easy to assemble\u003c\/li\u003e\n\u003cli\u003eThe joint units for each part of the frame are equipped with the 5mm HEXA G-R.A.M joints and the 3mm joints\u003c\/li\u003e\n\u003cli\u003eEasy to change out parts and customize your unit with other model lines\u003c\/li\u003e\n\u003cli\u003eConverts from dual-arm three-legged Droid form and four\u003cbr\u003elegged Beast form\u003c\/li\u003e\n\u003cli\u003eTail is highly flexible and weapons can be held at the tip\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGovernor not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstructions may or may not include English translation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo glue required for assembly, a hobby nipper is required to remove parts from runners\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eBox Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePieces to build\n\u003cul\u003e\n\u003cli\u003eTrack Down\u003c\/li\u003e\n\u003cli\u003e2 Light machine guns\u003c\/li\u003e\n\u003cli\u003e2 Grenade launchers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHEXA G-R.A.M\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41774565851318,"sku":"KOTHG075","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/10797999a7.webp?v=1784568957"},{"product_id":"kotobukiya-hg082-hexa-gear-governor-lat-black-rabbit","title":"Kotobukiya HG082 Hexa Gear: Governor LAT Black Rabbit","description":"\u003cp\u003eHexa Gear: Governor LAT Black Rabbit Plasti\u003cspan style=\"font-size: 0.875rem;\"\u003ec Model Kit\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eDescription\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eModel Specifications:\u003cbr\u003e■This model is a color variant of GOVERNOR PARA-PAWN LAT MIRROR Ver.1.5.\u003cbr\u003e*Model specifications and build are the same as GOVERNOR PARA-PAWN LAT MIRROR Ver.1.5.\u003cbr\u003e■The head and hair parts come fully pre-painted.\u003cbr\u003e■There are 3 different styles of head parts to give users the ability to assemble in various styles.\u003c\/p\u003e\n\u003cp\u003eIncluded Items:\u003cbr\u003e■Head A (Deception Repeater Type) x1\u003cbr\u003e■Head B (Rabbit Mask Type) x1\u003cbr\u003e■Head C (Regular Face Type) x1\u003cbr\u003e■Rabbit Mask x1\u003cbr\u003e■Lightweight Blade x1\u003cbr\u003e■Gun Knife x2\u003cbr\u003e■Left and Right Wrist Parts (Lightweight Blade Holding, Gun Knife Holding, Open, New Weapon Holding, Closed)\u003cbr\u003e■ PVC HEXA G-R.A.M. x1\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41774565884086,"sku":"KOTHG082","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/s-l960_c45930b5-2bd6-4fc2-b5ac-ab6d2c291cb1.jpg?v=1704245283"},{"product_id":"kotobukiya-hg092-hexa-gear-lord-impulse-jungle","title":"Kotobukiya HG092 1\/24 Hexa Gear: Lord Impulse Jungle","description":"\u003cp\u003eHexa Gear: Lord Impulse Jungle Plastic Mod\u003cspan style=\"font-size: 0.875rem;\"\u003eel Kit\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCombat preparation complete. Start your engines.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe third generation Hexa Gear masterpiece LORD IMPULSE combines with GOVERNOR ARMOR TYPE: PAWN A1 in a special dark green coloring to rejoin Kotobukiya’s Hexa Gear lineup!\u003c\/p\u003e\n\u003cp\u003e■ The included GOVERNOR ARMOR TYPE: PAWN A1 is of the Ver. 1.5 model specifications and uses the same military color scheme as EARLY GOVERNOR Vol.1 JUNGLE TYPE.\u003cbr\u003e■ The color scheme of Lord Impulse’s armor has been changed to the same military dark green that is used with other Hexa Gear.\u003cbr\u003e■ The unit’s distinctive “Trick Blade” tail is flexible and can be posed to give the mech an animalistic appearance. The blades on the tip can be opened and closed to hold small weapons. The number of joints can also be increased by using the included Trick Blade extension joints. The Trick Blade’s joints are connected with 3mm connectors, allowing users to freely attach multiple additional parts.\u003cbr\u003e■ The number of joints on a standard Trick Blade has only 8 joints, but this kit includes 16 joints to allow more customization options for users to enjoy.\u003cbr\u003e■ The mouth parts, known as “Hound Bite,” can be opened and closed, allowing it to be displayed with alternative parts or weapons such as Weapon Unit 06 Samurai Sword (sold separately).\u003cbr\u003e■ The magazines for the chain gun and automatic grenade launcher can be removed and attached to Rayblade Impulse (sold separately).\u003cbr\u003e■ The “strike edges” attached to the back of the front feet have a two-tiered expansion and contraction gimmick, allowing the blade parts to be displayed stowed or in use.\u003cbr\u003e■ The chain gun can be equipped with the included parts to be used as a weapon for Governor models.\u003cbr\u003e■ The joints for the hips and the back feet use updated parts, giving the model more flexibility than its predecessor, Rayblade Impulse. The new parts are also compatible with Rayblade Impulse (separately sold).\u003cbr\u003e■ The model can be converted between the combat-based Zoatex Mode and the mobility-based Vehicle Mode.\u003c\/p\u003e\n\u003cp\u003eIncluded Items:\u003cbr\u003eLORD IMPULSE\u003cbr\u003e■ Main Body x1\u003cbr\u003e■ Trick Blade Expansion Joints x8\u003cbr\u003e■ Chain Gun Expansion Parts x1\u003cbr\u003e■ 3mm Joints x4\u003c\/p\u003e\n\u003cp\u003eGOVERNOR ARMOR TYPE: PAWN A1\u003cbr\u003e■ Main Body ×1\u003cbr\u003e■ Sword ×1\u003cbr\u003e■ Rifle ×1\u003cbr\u003e■ Left and Right Wrist Parts (Closed, Open, Weapon Holding)\u003cbr\u003e■ PVC HEXA G-R.A.M. ×1\u003cbr\u003e■ Archive Card x1\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41774565916854,"sku":"KOTHG092","price":82.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/products\/s-l1600_d0b4d2c8-5343-4126-ad93-ee7d34b9f052.jpg?v=1662760058"},{"product_id":"kotobukiya-hg101-hexa-gear-army-container-set-night-stalker-ver","title":"Kotobukiya HG101 Hexa Gear Army Container Set (Night Stalkers Ver.)","description":"\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cp\u003eBuild up your Hexa Gear Governors artillery with the Army Container (Night Stalkers Ver.) set from Kotobukiya. The main container can be opened and closed to store the included weapons and accessories inside. The same also applies to the rifle case as users can store the included Anti-Material Rifle inside. The two different tanks can be stored inside of the case included with this model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGovernor and Frame Arms Girl kits not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1\/24 Scale\u003c\/li\u003e\n\u003cli\u003eMade of plastic\u003c\/li\u003e\n\u003cli\u003eThe main container can be opened and closed to store the included weapons and accessories inside\u003c\/li\u003e\n\u003cli\u003eBy extending the handles on the side the container can act like a suitcase for 15cm models\u003c\/li\u003e\n\u003cli\u003eThe rifle case can be opened and closed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGovernor and Frame Arms Girl kits not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstructions may or may not include English translation\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eBox Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAnti-material rifle\u003c\/li\u003e\n\u003cli\u003eGrenade launcher\u003c\/li\u003e\n\u003cli\u003eSubmachine Gun\u003c\/li\u003e\n\u003cli\u003ePanzerfaust \u003c\/li\u003e\n\u003cli\u003eContainer\u003c\/li\u003e\n\u003cli\u003eRifle case\u003c\/li\u003e\n\u003cli\u003eTank storage case\u003c\/li\u003e\n\u003cli\u003eTank G\u003c\/li\u003e\n\u003cli\u003e2 Tank W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41774565949622,"sku":"KTHG101","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/products\/s-l500_200e5887-d492-4741-a604-babb21df2968.jpg?v=1662760059"},{"product_id":"kotobukiya-hg102-hexa-gear-alternative-cross-raider-night-stalker","title":"Kotobukiya HG102 Hexa Gear Alternative Cross Raider (Night Stalkers Ver.) 1\/24 Scale Model Kit","description":"\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cp\u003eThe next model kit in the line Hexa Gear Alternative series has arrived. This line aims to create models that are both compact in size, and easy to assemble. This line features a similar assembly to that of the Governor series and is made to be an easy-to-build model kit for beginners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMade of plastic\u003c\/li\u003e\n\u003cli\u003eCompact and easy to assemble\u003c\/li\u003e\n\u003cli\u003eEquipped with the 5mm HEXA G- R.A.M joints and the 3mm joints\u003c\/li\u003e\n\u003cli\u003eThis model comes in a black coloration\u003c\/li\u003e\n\u003cli\u003eGovernor helmet type head parts to be assembled on other Governor models\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstructions may or may not include English translation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFigures, other model kits not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eBox Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePieces to build Cross Raider Model\u003c\/li\u003e\n\u003cli\u003eGovernor Helmet Type Head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41774566310070,"sku":"KTHG102","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/3c4f431d-a818-4742-8ae1-ea59b9acd4ca.avif?v=1784569660"},{"product_id":"kotobukiya-hg103-hexa-gear-booster-pack-003-night-stalkers-ver","title":"Kotobukiya HG103 Hexa Gear Booster Pack Forest Buggy (Night Stalker Ver.) 1\/24 Scale Model Kit","description":"\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cp\u003eHere's a handy four-wheeled vehicle, and like all Hexa gear items are highly customizable! In addition to being a basic small vehicle adaptable to many purposes, it can also be combined with parts from other Hexa Gear vehicles and items thanks to its 3mm hexagonal ports to create your own one-of-a-kind custom vehicle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e7.28 inches (18.50cm)\u003c\/li\u003e\n\u003cli\u003eMade of plastic\u003c\/li\u003e\n\u003cli\u003eHighly customizable\u003c\/li\u003e\n\u003cli\u003e3mm Hexagonal ports\u003c\/li\u003e\n\u003cli\u003eCan be combined with other Hexa Gear vehicles\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFigures not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstructions may or may not include English translation\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eBox Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePiece to build\n\u003cul\u003e\n\u003cli\u003eBuggy\u003c\/li\u003e\n\u003cli\u003eGrenade Launcher\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eBinoculars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41774566342838,"sku":"KOTHG103","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/10b5b44a-5ac2-4e8a-800e-5b58423bc419.jpg?v=1784569512"},{"product_id":"kotobukiya-hg109-hexa-gear-governor-bump-up-expander-collectors-edition","title":"Kotobukiya HG109 Hexa Gear Governor Bump Up Expander (Collector's Edition) 1\/24 Scale Model Kit","description":"\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cp\u003eThis updated version of the Hexa Gear Governor Bump Up Expander stands just over 4 inches tall and features newly revamped sculpting. The new hand parts are larger, allowing the completed figure to grip a wider range of weapons. This figure also features 50 points of articulation to create expressive, action-packed poses.\u003c\/p\u003e\n\u003cp\u003eThe Collectors Edition Hexa Gear Governor Bump Up Expander includes the impressive gatling blade weapon as well as a damaged mask and bare face parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4.13 inches (10.49cm)\u003c\/li\u003e\n\u003cli\u003eMade of plastic\u003c\/li\u003e\n\u003cli\u003eFeatures 50 points of articulation\u003c\/li\u003e\n\u003cli\u003eHands are larger and can hold separately sold products such as the Weapon Unit Series\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstructions my or may not include English translation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo glue required for assembly, a hobby nipper is required to remove parts from runners\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eBox Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePieces to build Governor Bump Up Expander\u003c\/li\u003e\n\u003cli\u003eDamaged Mask\u003c\/li\u003e\n\u003cli\u003eBare face part\u003c\/li\u003e\n\u003cli\u003e6 Pairs of hands\u003c\/li\u003e\n\u003cli\u003e2 Hand cannons\u003c\/li\u003e\n\u003cli\u003eHand cannon holder\u003c\/li\u003e\n\u003cli\u003e2 Gatling blades\u003c\/li\u003e\n\u003cli\u003e2 Bandolier belts\u003c\/li\u003e\n\u003cli\u003eBackpack\u003c\/li\u003e\n\u003cli\u003eLeft and right magazines\u003c\/li\u003e\n\u003cli\u003eArchive card\u003c\/li\u003e\n\u003cli\u003ePVC Hexa G-R.A.M.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41774566375606,"sku":"KOTHG109","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/products\/603133044.jpg?v=1662760068"},{"product_id":"kotobukiya-hg049-hexa-gear-governor-armor-type-pawn-a1-ver-1-5","title":"Kotobukiya HG049 Hexa Gear: Governor Armor Type: Pawn A1 Ver. 1.5","description":"\u003cp\u003e1\/24 Hexa Gear: Governor Armor Type: P\u003cspan style=\"font-size: 0.875rem;\"\u003eawn A1 Ver. 1.5\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCombat preparation complete. Start your engines.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel Information:\u003cbr\u003e\u003c\/strong\u003eOfficial Name: PAWN Advanced 1\u003cbr\u003eArmor Type is a name for reinforced armored suits for Governors. It is a sealed work suit with armored exterior and artificial muscles used to withstand extreme environments. It still has a life-support system installed as conventional suits did, enabling it to operate for extended periods of time in contaminated areas such as around a Crystal Reactor.\u003cbr\u003eA1 is an improved model that was developed after an early model called the Pawn.\u003cbr\u003eAlthough originally created as advanced level equipment for soldiers, its features such as enhancing physical capabilities and various self-contained functions attracted attention as armor for Governors. Thus the A1 was developed with additional functions such as having a link with the AI, KARMA.\u003c\/p\u003e\n\u003cp\u003eWhat differs most from normal dynamic armor is that the armor’s back unit is equipped with a regenerative energy pack charged by a HEXA G-R.A.M, which acts as a semi-permanent power source for the operation of the armor. HEXA G-R.A.M permeates the artificial muscle fibers inside the suit, greatly expanding the Governor’s strength and mobility.\u003cbr\u003ePawn A1 is currently manufactured and supplied in large quantities by a group of corporations called the Liberty Alliance. It is not distributed to the general public, and is difficult to obtain for individuals who do not belong to the military.\u003c\/p\u003e\n\u003cp\u003ePawn A1 was developed based on the concept of \"man-machine oneness\" and has gained strength to be able to fight alongside Hexa Gear in Zoatex mode.\u003cbr\u003eAs specs of Hexa Gear became more focused on agility than having heavy armor, Governors also went through changes in response to keep up with the machines using physical enhancements and building toughness. Governors must be soldiers who fight alongside the machine–not just a normal pilot.\u003c\/p\u003e\n\u003cp\u003eThe model’s standard weapons are the Hyper Vibration Sword that vibrates its blade and cuts like a saw, and the Assault Rifle.\u003cbr\u003eAlthough they appear to be the same, minor changes are made depending on the manufacturer to improve the power assist and various other functions using artificial muscles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeapons:\u003cbr\u003e\u003c\/strong\u003e■ Hyper Vibration Sword\u003cbr\u003e■ Assault Rifle\u003c\/p\u003e\n\u003cp\u003eBased on user requests, the Hexa Gear series’ Governor models are getting a massive upgrade! The first model to be updated is Governor Armor Type: Pawn A1.\u003c\/p\u003e\n\u003cp\u003e■ Update 1\u003cbr\u003eThe head, upper arm, thigh, abdomen, and crotch armor that were previously made of PVC are now made of PS, making them more suitable for painting and customization (the hand parts will still be made of PVC).\u003c\/p\u003e\n\u003cp\u003e■ Update 2\u003cbr\u003eAlong with the change of material, the part designs have also been reconfigured, and are made using a completely new mold. Although the design is unchanged, the head part is now made of three different colored pieces, while the rest of the design remains as is. The connector part on the HEXA G-R.A.M. piece for the back of the model has been change to a 3mm part.\u003c\/p\u003e\n\u003cp\u003e■ Update 3\u003cbr\u003eThe updated version of the model includes new articulation features that make the model easier to pose\u003cbr\u003e・The hands can now be moved to the front and back.\u003cbr\u003e・The torso has been adjusted so that the ball joint does not pop out.\u003cbr\u003e・The boxes on the hips are now moveable, and the change of material prevents them from interfering with other parts of the model.\u003c\/p\u003e\n\u003cp\u003e■ Despite its small stature of 74 mm, this Governor boasts 26 points of articulation.\u003cbr\u003e■ The sword blade can be attached to the rifle to use as a bayonet.\u003cbr\u003e■ The connection points on the shoulders are 3 mm in diameter, making them compatible with parts from other Hexa Gear, Frame Arms, and M.S.G kits.\u003cbr\u003e■ The back unit has a standardized connector for the HEXA G-R.A.M system, allowing customization with a variety of parts.\u003cbr\u003e■ Some details on the head and torso are pre-painted to give the model a finished look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Items:\u003cbr\u003e\u003c\/strong\u003e■ Sword ×1\u003cbr\u003e■ Rifle ×1\u003cbr\u003e■ Hand Parts (Closed, Open, Weapon Holding) ×1 Set Each\u003cbr\u003e■ PVC HEXA G-R.A.M. ×1\u003cbr\u003e■ Archive Card ×1\u003c\/p\u003e\n\u003cp\u003e(This item is a reproduction.)\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41817780224182,"sku":"KOTHG049","price":22.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/1000_d55b5922-ca8e-4521-a147-8f067809ec10.jpg?v=1742238048"},{"product_id":"kotobukiya-hg077-hexa-gear-lord-of-zoatex","title":"Kotobukiya HG077 Hexa Gear L.O.Z. (Lord of Zoatex) 1\/24 Scale Model Kit","description":"\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cp\u003eThe Hexa Gear L.O.Z. (Lord of Zoatex) is here!\u003c\/p\u003e\n\u003cp\u003eThe head unit features a large (standard) type head, reminiscent of a carnivorous beast, and a smaller type. Users can swap and change to suit their style. *Both the large and small heads can be assembled separately. (Only 1 set of the \"Cross Laser Fang\" blades is included.)\u003c\/p\u003e\n\u003cp\u003eOne of the main features of this model is the slide mechanism included in the artificial muscle unit of the neck. The mechanism follows the movements of the main neck unit to make this part flexible.\u003c\/p\u003e\n\u003cp\u003eThe crushing unit in the mouth (Emperor Bite) opens and closes vertically and the internal Imperial Roar generator is recreated in clear parts, allowing users to enjoy various howling and roaring poses. The base of the large \"Cross Laser Fang\" blades that are equipped on the head can be opened and closed to create flexible poses. The bases of the air maneuver thrusters, attached to the shoulders, have a flexible range of movement and can fit a shield made of clear parts. \u003c\/p\u003e\n\u003cp\u003eThe poseability feature of the main body aims to replicate the supple flexibility of felines. Based on feedback from the Weird Tails and Voltrex Wrath kits, every joint is constructed using 5mm joints and features vertical and horizontal movement for easier enjoyment and an increased range of movement.\u003c\/p\u003e\n\u003cp\u003eThe Tactical High Energy Laser installed next to the console features a flexible arm base for flexible posing. The shoulders and joints are constructed like shoulder blades, making them more adjustable and expressive. Each joint of the huge \"Trick Blade\" tail features universal joints for 360° poseability, and the revolver part of the \"Judgment Ram\" tip can be rotated.\u003c\/p\u003e\n\u003cp\u003eThe cockpit grips can be rotated, and the console unit itself can be removed. The steps of the seat unit feature movable bases that can be adjusted to fit the feet of the Governor onboard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e16.34 inches (41.5cm)\u003c\/li\u003e\n\u003cli\u003eMade of plastic\u003c\/li\u003e\n\u003cli\u003eCockpit grips can be rotated, and the console unit itself can be removed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstructions may or may not include English translation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo glue required for assembly, a hobby nipper is required to remove parts from runners\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch2 class=\"ada-product-h2\"\u003eBox Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePieces to build\n\u003cul\u003e\n\u003cli\u003eL.O.Z.\u003c\/li\u003e\n\u003cli\u003eAir maneuver thrusters\u003c\/li\u003e\n\u003cli\u003eTactical High Energy Laser\u003c\/li\u003e\n\u003cli\u003eTrick blade\u003c\/li\u003e\n\u003cli\u003eCockpit grips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41817780256950,"sku":"KTHG077","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/10850438p.avif?v=1784568086"},{"product_id":"kotobukiya-hg071-hexa-gear-early-governor-vol-6","title":"Kotobukiya HG071 Hexa Gear: Early Governor Vol.6","description":"\u003cp\u003eHexa Gear: 1\/24 Early Governor Vol.6\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCombat preparation complete. Start your engines.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eModel Specifications:\u003cbr\u003e■ 5 newly designed head parts are included. Various types of helmets are included such as the EARLY GOVERNOR Vol.1’s “Stahlhelm” and “Pilot Type (With\/Without Visor).” This Governor can be displayed with a cap with\/without a headset to show her time away from the field. Users can display this item in various combinations depending on the assembly.\u003c\/p\u003e\n\u003cp\u003e*The eyes are not pre-painted so users will need to paint them in themselves.\u003c\/p\u003e\n\u003cp\u003e■ The ankle parts use the same side-roll joints as Early Governor Vol.1 to allow for a wide range of action poses.\u003c\/p\u003e\n\u003cp\u003e■ 3 sets of newly sculpted hand parts are included with the 4 sets of hand parts from Early Governor Vol.3 so users can recreate a wide variety of poses.\u003c\/p\u003e\n\u003cp\u003e■ A backpack, laptop terminal, and medical gun are included as optional parts. Display this model with HEXA GEAR BLOCK BASE 01 DX HEAD QUARTERS to create various realistic scenarios.\u003c\/p\u003e\n\u003cp\u003eIncluded Items:\u003cbr\u003e■ Early Governor Vol.6 Model x1 set\u003cbr\u003e■ 5 Types of Head Parts x1 set\u003cbr\u003e■ PVC Hand Parts x7 sets\u003cbr\u003e■ Medical Gun x1\u003cbr\u003e■ Laptop Terminal x1\u003cbr\u003e■ Backpack x1\u003cbr\u003e■ PVC HEXA G-R.A.M. x1\u003cbr\u003e■ Archive Card x1\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41985668939958,"sku":"KOTHG071","price":25.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/products\/s-l500_fb0802ca-1532-4068-8d07-dd1fa0d9d761.jpg?v=1673651629"},{"product_id":"kotobukiya-hg085-hexa-gear-governor-ignite-spartan","title":"Kotobukiya HG085 Hexa Gear: Governor Ignite Spartan","description":"\u003cp\u003eHexa Gear: 1\/24 Governor Ignite Spartan\u003c\/p\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eCombat preparation complete. Start your engines.\u003c\/p\u003e\n\u003cp\u003eModel Specifications:\u003cbr\u003e■ A model with massive structural and detail updates on the PARA-PAWN IGNITE making this Governor worthy of being called ver.2.0.\u003cbr\u003e■ The parts other than the wrist are completely newly designed. A hybrid model incorporating joint structures from other models, such as WARMAGE, with a hip joint that can hold larger weapons, neck joints that can articulate front and back, and axial joint structures of the ankle.\u003cbr\u003e■ Two types of helmet decorations are included. Use either the large type or the small type according to your preference.\u003cbr\u003e■ The universal arm on the back has an original design and can be moved at 8 points of articulation on each side to give various expressions.\u003cbr\u003e■ The \"Colossal Lance\" can be folded in the center and includes a telescoping feature at the base that can act as a pile bunker.\u003cbr\u003e■ The Colossal Lance can be divided at the center. The connecting parts come in two types; one emphasizing appearance and the other with a 3mm connection hole compatible with various parts, including the flying base, so it can be used in a wide range of situations.\u003cbr\u003e■ The shotgun included can be attached to 3mm holes on the hard points such as those on the thighs.\u003cbr\u003e■ Various parts can be equipped by attaching the shield mount to the forearm.\u003cbr\u003e■ The head sensor is pre-painted.\u003cbr\u003e■ The color scheme of this model is black, dark gray, light gray, and silver.\u003c\/p\u003e\n\u003cp\u003eIncluded Items:\u003cbr\u003e■ IGNITE SPARTAN x1\u003cbr\u003e■ Helmet Decoration A (large) x1\u003cbr\u003e■ Helmet Decoration B (small) x1\u003cbr\u003e■ 3 types of Wrists (left and right) x1\u003cbr\u003e■ Colossal Lance x1\u003cbr\u003e■ Round Shield x1\u003cbr\u003e■ Shotgun x1\u003cbr\u003e■ Universal Arm x1\u003cbr\u003e■ Shield Mount Attachment x2\u003cbr\u003e■ PVC HEXA G-R.A.M. x1\u003cbr\u003e■ Archive card x1\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":41985668972726,"sku":"KOTHG085","price":35.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/products\/s-l1600_b365370b-42b7-472e-9bb5-eb1665332e39.jpg?v=1673651692"},{"product_id":"kotobukiya-hg108-hexa-gear-sieg-springer-queens-guard-version","title":"Kotobukiya HG108 Hexa Gear Sieg Springer (Queen's Guard Ver.) 1\/24 Scale Model Kit","description":"\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cp\u003eCombat preparation complete. Start your engines. \u003c\/p\u003e\n\u003cp\u003eThis model kit features details of the artificial muscle units and they have been sculpted to make a more organic silhouette compared to previous third generation Hexa Gear kits. \u003c\/p\u003e\n\u003cp\u003eThis version of Sieg Springer features a different color scheme for the armor and includes newly designed parts, including two different horns: a blazing horn and a ram horn. By swapping out the head and step units a Governor unit can be mounted in front like a centaur. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther figures and accessories shown not included (sold separately)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch3 class=\"ada-product-h2\"\u003eProduct Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e11.02 inches (28cm) \u003c\/li\u003e\n\u003cli\u003e1\/24 Scale\u003c\/li\u003e\n\u003cli\u003eMade of PS and ABS\u003c\/li\u003e\n\u003cli\u003ePart of the Hexa Gear model kit line\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstructions may or may not include English translation\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-md-12\"\u003e\n\u003cdiv class=\"well well-sm\"\u003e\n\u003ch3 class=\"ada-product-h2\"\u003eBox Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePieces to build\n\u003cul\u003e\n\u003cli\u003eSieg Springer\u003c\/li\u003e\n\u003cli\u003eStep Unit\u003c\/li\u003e\n\u003cli\u003e2 Boost effect parts\u003c\/li\u003e\n\u003cli\u003e2 Original effect parts\u003c\/li\u003e\n\u003cli\u003eRam Horn\u003c\/li\u003e\n\u003cli\u003eForefoot customization parts (left and right)\u003c\/li\u003e\n\u003cli\u003e2 3mm Joint parts\u003c\/li\u003e\n\u003cli\u003eBlack flying base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eArchive card\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":42051844964534,"sku":"KTHG108","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/49162dd8-a624-4462-93e7-9f4173223fcc.avif?v=1784569366"},{"product_id":"kotobukiya-mt005r-hexa-gear-parts-remover-tool","title":"Kotobukiya MT005R Hexa Gear: Parts Remover Tool","description":"\u003cp\u003e1\/24 Hexa Gear: Parts Remover Tool\u003c\/p\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e\"A convenient tool with 3 functions that allow for easy customization of Hexa Gear products.\u003c\/p\u003e\n\u003cp\u003eProduct Specifications:\u003cbr\u003e1) The separator is made of metal and can be wedged between two parts in order to take them apart.\u003cbr\u003e2) The hexagonal tip can be used to push out parts such as HEXA G-R.A.M. poly caps.\u003cbr\u003e3) The screw pins can be used to loosen and remove parts such as HEXA G-R.A.M poly caps when they get stuck.\u003c\/p\u003e\n\u003cp\u003eIncluded Items:\u003cbr\u003eParts Remover x1\u003cbr\u003eScrew Pin x2\u003c\/p\u003e\n\u003cp\u003e(This item is a reproduction.)\"\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":42051845062838,"sku":"KOTMT005R","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/products\/kotmt005r.jpg?v=1677344216"},{"product_id":"kotobukiya-hg089-hexa-gear-booster-pack-006-forklift-type-orange-ver","title":"Kotobukiya HG089 Hexa Gear Booster Pack 006 Forklift Type Orange Ver.","description":"\u003cp\u003e1\/24 Hexa Gear Series: Booster Pack 006 Forklift Ty\u003cspan style=\"font-size: 0.875rem;\"\u003epe Orange Ver.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eDescription\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\"HEXA GEAR BOOSTER PACK006 FORKLIFT TYPE is a forklift that goes well with the Block Base Series and the Governor Engineer Set. Available in two colors: orange, which ranked first in the popularity vote, and dark blue that matches BULKARM α. It is ideal for creating scenes with HEXA GEAR being assembled or garage displays in combination with various accessories. A work-use BULKARM can be created by attaching parts from the forklift to a BULKARM α, which is sold separately. Model Specifications: ■This product is a variation kit that reuses some cockpit parts from HIGHTRAGER. There is no difference between the orange and dark blue versions other than the armor color. ■The forklift can be disassembled into the body, fork unit, and roof unit. ■The fork unit can be extended and retracted in two stages by the mast slide rail mechanism. This allows the items placed on the forks to be moved from a low to a high position. In addition, the fork unit can be detached from the central connecting parts. The use of the included fork unit extension attachment allows attachment to 3mm joints, enabling the split fork unit parts to be used as hands for HEXA GEAR and Frame Arms, etc. ■The base connecting the fork unit can be moved up and down, or extended forward. ■A rear-wheel steering system is adopted based on actual forklifts, which moves the left and right rear wheels together. ■A “work-use BULKARM” can be created by combining the forklift with BULKARM α using the included combining unit. To combine them, it is necessary to partially disassemble the cockpit of BULKARM α itself. ■When building a work-use BULKARM, the unused forklift body can be enjoyed as an unmanned tow vehicle. ■The HEXAGRAM storage can be removed from the body frame inside the armor. ■The base of the light on the each side of the windshield is movable, and the mirror parts, which are connected using ball joints, can be angled. ■The front and rear tires are newly designed and PS molded. ■The counterweight tail lamps are color-coded with clear parts. ■The color scheme for this kit is orange (new color), gunmetal, clear orange, clear red, clear, black, and silver. Included Items: ■Forklift Body x1 Set ■Fork Spare x2 ■Fork Unit Extension Attachment x2 ■BULKARM α Combining Unit x1 Set\"\u003c\/span\u003e\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":42079637864630,"sku":"KOTO-HG089","price":75.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/products\/s-l1600_afa53ead-4059-483b-9419-0ac8d81d3fa5.jpg?v=1677355006"},{"product_id":"kotobukiya-hg088","title":"Kotobukiya HG088 Hexa Gear Governor Weapons Gatling Blade 1\/24 Scale Model Kit","description":"\u003cp\u003eThe Hexa Gear Governor Weapons Gatling Blade is a heavy weapon accessory kit designed to equip 1\/24 scale Governors and other compatible character model kits with an imposing hybrid melee and ranged weapon. Featuring a pair of massive Gatling Blade weapons, this accessory set combines the appearance of oversized rotary cannons with blade-like profiles, making it ideal for creating dynamic close-quarters combat displays. The weapons are designed to pair especially well with the Governor Bump Up Expander while remaining compatible with many other Kotobukiya character kits.\u003c\/p\u003e\n\u003cp\u003eThe set also includes flexible bandolier belts with internal wire cores, allowing builders to bend and pose the ammunition belts naturally without sacrificing durability. A dedicated backpack and magazine units complete the equipment loadout, while compatibility with standardized connection systems makes the kit an excellent upgrade for Hexa Gear, Frame Arms Girl, Megami Device, and other customization projects.\u003c\/p\u003e\n\u003ch2\u003eProduct Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eBased on the Hexa Gear series\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGovernor Weapons accessory set\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIncludes two Gatling Blade weapons\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned for 1\/24 scale Governor model kits\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFlexible bandolier belts with internal wire cores\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBackpack-mounted equipment system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLeft and right magazine units included\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDetailed mechanical sculpt\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan be painted and customized\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with Governor Bump Up Expander\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with Hexa Gear, Frame Arms Girl, Megami Device, and other compatible model kits\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlastic model accessory kit\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAssembly required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eTwo Gatling Blade weapons\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBackpack unit\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo bandolier belts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLeft magazine\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRight magazine\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAssembly instructions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":42262213296310,"sku":"KOTHG088","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/10811854p.avif?v=1784569104"},{"product_id":"kotobukiya-hg106","title":"Kotobukiya HG106 Hexa Gear Governor Lat Solid","description":"\u003cp\u003e1\/\u003cspan style=\"font-size: 0.875rem;\"\u003e24 Hexa Gear Governor Lat Solid [Prime]\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCombat preparation complete. Start your engines.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel Information:\u003c\/strong\u003e\u003cbr\u003eSolid is a type of infantryman's equipment classified as a light armor type.\u003cbr\u003eIts development was before that of the Pawn series as a result of the search for BMI-compatible infantry equipment, which is affiliated with the Warmage series.\u003cbr\u003eAlthough this armor is a piece of transitional equipment and uses 2.5th generation technology, its lightweight design and high degree of movement still meet the requirements for special operations today. Even after the emergence of Pawns and the new weapon system, Armor Type, the LAT Solid still continues to be used.\u003cbr\u003eWarmage is designed to expand use of BMI, which focuses on the operation of Armors and HEXA GEAR, and has optics throughout its body to improve vision of movement at close range and enhance adaptability to CQC.\u003cbr\u003eHowever, the BMI system was implemented before solving problems such as the abnormal load placed on the brain for processing enormous amounts of information and keeping nonhuman equipment under control.\u003cbr\u003eOf course, a solution to this problem that lurks around until the later \"Trance Corridor\" is being searched for, and a significant amount of data was obtained during synchronous tests with BMI and BULKARM GLANZ, which was being developed at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e【PRIME】\u003c\/strong\u003e\u003cbr\u003eThere are several grades of LAT Solid in accordance to users’ physique and BMI proficiency. Full-spec models for adults are called Prime.\u003cbr\u003eAfter the emergence of the Pawn series, the Solid series shifted from front-line combat to training and special missions. However, seeing how light the suits are, a special glide module was developed. These glide modules allow the suits to act like the former paratroopers and a mobile light infantry unit was formed.\u003cbr\u003eMultiple training exercises have been conducted in which two to four LAT Solids attached to the legs of WINDFALLS drop from the sky for high-speed descent and deployment. Through such operations, they have been able to penetrate MSG-controlled areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel Specifications:\u003c\/strong\u003e\u003cbr\u003e■ Despite its small stature (78mm), the model features 29 points of articulation, allowing it to kneel and assume various poses.\u003cbr\u003e■ The neck joint can move forward and backward to create a wide variety of poses such as tucking in the chin and facing upward diagonally.\u003cbr\u003e■ The ankle joints are moveable for extra stability when standing.\u003cbr\u003e■ The included carbon blade can be attached to the magazine holder on the waist.\u003cbr\u003e■ Various parts can be attached to the model via the HEXA G-R.A.M connector on its back and the 3mm connection points on the thighs and lower back hip.\u003cbr\u003e■ The color scheme of this model is blue, light gray, dark brown, black, and orange.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Items:\u003c\/strong\u003e\u003cbr\u003e■ Lightweight Railgun: Type L x 1\u003cbr\u003e■ Carbon Blade x 1\u003cbr\u003e■ Glide Module (Falcom) x 1\u003cbr\u003e■ Waist Magazine Holder x 1\u003cbr\u003e■ Hand Parts (Closed, Open, Weapon Holding A, Weapon Holding B) x Left and Right Each\u003cbr\u003e■ PVC HEXA G.R.A.M x 1\u003cbr\u003e■ Archive Card x 1\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":42262213558454,"sku":"KOTHG106","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/s-l300_19c89cbb-e9b4-4404-a501-7722846e3340.jpg?v=1702078569"},{"product_id":"kotobukiya-hg107","title":"Kotobukiya HG107  Hexa Gear Governor Lat Solid [Cradle]","description":"\u003cp\u003e1\/24 Hexa Gear Governor Lat Solid [Cradle]\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCombat preparation complete. Start your engines.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel Information:\u003c\/strong\u003e\u003cbr\u003eSolid is a type of infantryman's equipment classified as a light armor type.\u003cbr\u003eIts development was before that of the Pawn series as a result of the search for BMI-compatible infantry equipment, which is affiliated with the Warmage series.\u003cbr\u003eAlthough this armor is a piece of transitional equipment and uses 2.5th generation technology, its lightweight design and high degree of movement still meet the requirements for special operations today. Even after the emergence of Pawns and the new weapon system, Armor Type, the LAT Solid still continues to be used.\u003cbr\u003eWarmage is designed to expand use of BMI, which focuses on the operation of Armors and HEXA GEAR, and has optics throughout its body to improve vision of movement at close range and enhance adaptability to CQC.\u003cbr\u003eHowever, the BMI system was implemented before solving problems such as the abnormal load placed on the brain for processing enormous amounts of information and keeping nonhuman equipment under control.\u003cbr\u003eOf course, a solution to this problem that lurks around until the later \"Trance Corridor\" is being searched for, and a significant amount of data was obtained during synchronous tests with BMI and BULKARM GLANZ, which was being developed at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e【CRADLE】\u003c\/strong\u003e\u003cbr\u003eThe Cradle was originally developed as a piece of equipment to strengthen underage pilots who are not yet fit to become soldiers as well as to familiarize them with the BMI system.\u003cbr\u003eThe Cradle is light, easy to handle, and has a flexible cockpit that can seat any pilot regardless of sex or physical size. To reduce load, some functions such as the optics are limited during roll-out.\u003cbr\u003eHowever, a hypothesis was raised that by exposing pilots to the BMI system in their early stages of physical development, they can later acquire a higher aptitude. To prove this, all members of the Selected Adolescent Soldier unit serving directly under the upper management of the Liberty Alliance are armed with Cradles in full spec.\u003cbr\u003eThis unit is said to be a private army for a certain group of executives and is dubbed \"Night Stalkers\" by the standard units, who fear and steer clear of them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel Specifications:\u003c\/strong\u003e\u003cbr\u003e■ Despite its small stature (70mm), the model features 29 points of articulation, allowing it to kneel and assume various poses.\u003cbr\u003e■ The neck joint can move forward and backward to create a wide variety of poses such as tucking in the chin and facing upward diagonally.\u003cbr\u003e■ The ankle joints are moveable for extra stability when standing.\u003cbr\u003e■ Various parts can be attached to the model via the HEXA G-R.A.M connector on its back and the 3mm connection points on the thighs and lower back hip.\u003cbr\u003e■ The color scheme of this model is white, light gray, dark brown, black, and orange.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Items:\u003c\/strong\u003e\u003cbr\u003e■ Lightweight Railgun: Type C x 1\u003cbr\u003e■ Stun Rod x 1\u003cbr\u003e■ Hand Parts (Closed, Open, Weapon Holding A, Weapon Holding B) x Left and Right Each\u003cbr\u003e■ PVC HEXA G.R.A.M x 1\u003cbr\u003e■ Archive Card x 1\u003c\/p\u003e","brand":"Kotobukiya","offers":[{"title":"Default Title","offer_id":42262213623990,"sku":"KOTHG107","price":32.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/s-l1600_b4055e9d-a972-4a6f-bedc-0bda0009368d.jpg?v=1702078502"}],"url":"https:\/\/www.acshobbies.sbs\/collections\/hexa-gear.oembed","provider":"ACS Hobbies","version":"1.0","type":"link"}